Computer Aided design

The assignment was in 2 categories ;

Group Assignment

This involved characterizing the laser cutter. to find the kerf(which is the material used by the laser during cutting ) we made a box of a known dimension (50mm)and divided it into 10 parts. We then cut it ,compressed the cut pieces and then took the measurement again. we divided the measurement by 11 to find the kerf.

Individual assignment

I intended to make a zeolite structure. the illussion of the 3D structure placed in a cardboard is one below. For the vinyl cutter i did a logo of the Fab lab Nairobi and something that goes round my lab as a google joke